How to Make Your Own Dog Mask – The Basics
In this article we’re going to examine how to create your own dog mask. We’ll cover the basics and then go on to take a look at a number of the more advanced tips and tricks that you can use.
For those who have a dog that likes to bark, and particularly if your dog loves to play in the garden and other areas of the home, you will need to get them some special dog protection.
Paper Plate 3d Dog Mask DIY Materials: This is the initial part of the setup which will look a little scary at first, but it’s really very straightforward. All you have to do is take a cardboard cutting board https://dogsrecommend.com/dog-mask and cut the cardboard into the shape of your mask. You can not just cut a rectangular shape out of the cardboard, so you will need to cut around the edge of the mask so you get something that resembles a cone. The most important thing here is to be realistic with what kind of paper plate that you’re using.
Then you will need to wrap the cardboard around the edges of the paper plate, making certain that there is a good seal between the two pieces so you can make certain that nothing will leak when you put the mask on. Be sure that the edges are cut so that the edges are not sharp, as this can damage the edges of the mask.
Glue it on! The next step involves using some paint. You should spray the paint over the cardboard, making sure that it runs smoothly and evenly across the entire mask. You’ll want to start with one side of the mask , so you can work your way around it before moving onto the other side. The paint needs to be slightly thicker than the cardboard, and it is best that you leave about one-third of an inch of paint on the edges so that it runs across the cardboard.
Don’t fret too much about the paint getting stuck into your mask. It’s easy to eliminate it later, and it’ll leave you with a nice finished mask to show off to everybody! It’s also a good idea to wash away any excess paint after you’re done, so that you don’t wind up with smudges or smears on your dog.
Then it’s time to glue the mask onto your dog’s head. First you will need to make sure that you have a secure fit between the mask and your dog’s head. As soon as you’ve made sure that it is secure, then you may start to glue the mask on the dog’s face. Take the piece of cardboard that’s used for the base of the mask and fold it over. Be sure that it’s quite strong and then use your hands to secure the cardboard down in place.
Keep your hands out of the way and use tape to hold it in place as you repeat the procedure on the cardboard folds until you’ve got the mask snugged securely onto the surface of your dog. Don’t make the folds too big or else it could look messy. Once you’ve done this, you can then take out the mask and then attach the cardboard ears. And attach the other area of the mask onto the dog. Make certain the ears are level and be sure that it is not too short or long as this will cause some issues with the mask slipping off the dog’s face.
If you are using a dog mask because your dog protection, you will need to do some sanding to be sure that it is safe on your dog. You can accomplish this by sanding off any excess paper which might have been removed from your mask.